Datatek Upgrade/Backup/Reload User Manual
Page 18
U t i l i t i e s
03/08/07
18
5 I
N S T A L L A T I O N
A
D D E N D U M
5.1 O
BTAINING
I
NFORMATION FROM
T
ELE
C
OMP
R&D
Load modules for all the TeleComp R&D products are obtained by sending email to
. All other documentation, including release notes, user manuals, “white-
papers”, etc. can be accessed on the TeleComp R&D web site and downloaded for your use.
To insure that the correct version of the binary load modules have been retrieved and has not been
corrupted during the transmission process, the UNIX
sum command can be used.
On some hosts, the “-s” flag must be used with the sum command. On X86 linux hosts, the –sysv
flag must be used with the sum command.
Key-in sum < name of load module file>.
The values returned must match the numbers shown below:
For example:
Key-in:
sum –sysv *
Response:
26608 225 backup.hpux.18.4
52048 68 backup.linux.18.4
60588 66 backup.sun.18.4
1319 217 devrep.hpux.1.2
22600 63 devrep.linux.1.2
50597 69 devrep.sun.1.2
12919 257 getinfo.hpux.1.2
15896 91 getinfo.linux.1.2
7071
105 getinfo.sun.1.2
64965 225 reload.hpux.18.4
28953 69 reload.linux.18.4
49195 67 reload.sun.18.4
23029 241 setreg.hpux.1.2
33722 81 setreg.linux.1.2
18796 89 setreg.sun.1.2
36390 225 upgrade.hpux.18.4
12592 70 upgrade.linux.18.4
63295 69 upgrade.sun.18.4
UNIX is a registered trademark in the United States and other countries licensed exclusively
through X/Open Company, Ltd.