DFI DS912-OT Manual - Manual (Page 43)

43
5
Ports and Connectors
DVI-I
The DVI-I port is used to connect an LCD monitor. Connect the display device’s
cable connector to the DVI-I port. After you plug the cable connector into the
port, gently tighten the cable screws to hold the connector in place.
Connect the display device’s cable connector to the DVI-I port. After you plug the
cable connector into the port, gently tighten the cable screws to hold the connec-
tor in place.
BIOS Setting
Confi gure the display device in the Advanced Chipset Features submenu of the
BIOS. Refer to chapter 3 for more information.