DFI CP908-B - Manual (Page 19)

19
2
Hardware Installation
COM Express Connectors
The COM Express connectors are used to interface the CP908-B COM Express
board to a carrier board. Connect the COM Express connectors (lcoated on the
solder side of the board) to the COM Express connectors on the carrier board.
Refer to the “Installing CP908-B onto a Carrier Board” section for more informa-
tion.
COM Express Connectors
Refer to the following pages for the pin functions of these connectors.
COM Express connector
COM Express connector
A1
B1
C1
D1
A110
B110
C110
D110