DFI CP908-B - Manual (Page 96)

96
A
nLite and AHCI Installation Guide
The installation steps below will guide you in configuring your SATA drive to AHCI
mode.
1. Enter the BIOS utility and configure the SATA controller to IDE mode.
2. Install Windows XP but do not press F6.
3. Download relevant RAID/AHCI driver files supported by the motherboard
chipset from Intel’s website.
Transfer the downloaded
driver files to C:\AHCI.
4. Open Device Manager and
right click on one of the
Intel Serial ATA Storage
Controllers, then select Up-
date Driver.
If the controller you se-
lected did not work, try
selecting another one.
AHCI