DFI LR905-B18D - Manual (Page 32)

32
3
BIOS Setup
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU
information.
For UP platforms,
leave it enabled.
For DP/MP servers,
it may use to tune
performance to the
specific application.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure advanced CPU settings
Module Version:3F.1C
Manufacturer : Intel
Intel(R) Atom(TM) CPU D525 @ 1.80GHz
Frequency : 1.90GHz
FSB Speed : 800MHz
Cache L1 : 64KB
Cache L2 : 1024KB
Ratio Actual Value:9.5
Max CPUID Value Limit [Disabled]
Execute-Disable Bit Capability [Enabled]
Hyper Threading Technology [Enabled]
Intel (R) Speedstep (tm) Tech [Disabled]
Advanced
Max CPUID Value Limit
Set this field to Disabled when using Windows XP. Set this field to Enabled
when using legacy operating systems so that the system will boot even when
it doesn’t support CPUs with extended CPUID function.
Execute Disable Bit Capability
When this field is set to Disabled, it will force the XD feature flag to always
return to 0.
Hyper-Threading Technology
This field is used to enable the functionality of the Intel ® Pentium ® 4 Proces-
sor with Hyper-Threading Technology and will appear only when using this
processor.
Intel (R) SpeedStep(TM) Tech
Enables or disables GV3.