DFI LR905-B18D - Manual (Page 39)

39
3
BIOS Setup
AHCI Port0 to AHCI Port2
Configures the AHCI port.
Select the type
of device connected
to the system.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
AHCI Port0
Device :Not Detected
SATA Port0
S.M.A.R.T.
Advanced
[Auto]
[Enabled]
SATA Port0
Selects the type of device connected to the system.
S.M.A.R.T.
The system board supports SMART (Self-Monitoring, Analysis and Reporting
Technology) hard drives. SMART is a reliability prediction technology for ATA/
IDE and SCSI drives. The drive will provide sufficient notice to the system
or user to backup data prior to the drive’s failure. The default is Disabled. If
you are using hard drives that support S.M.A.R.T., set this field to Enabled.
SMART is supported in ATA/33 or later hard drives. The options are Auto, En-
abled and Disabled.