Digi-Star EZ 4600 Manual DataKey - Manual (Page 29)

Manual Programming of Recipes
D3716-US REV D EZ4600 User’s Manual 25
MANUAL PROGRAMMING OF RECIPES
Three different entry methods for entering ingredients:
Amount Per Animal (this is the default setting)
Allows entry of ingredient amounts required for feeding one animal.
Indicator calculates preset amounts required for each ingredient.
Percent (%) Per Load
Enter ingredient amounts in (%). Indicator calculates amounts for each
ingredient. Total of all ingredients must equal 100% in this mode.
Amount Per Load
Allows entry of ingredient amounts required per load.
Change Entry Method
Ingredient Re-Name
1. Enter 441 press .
2. Repeatedly press scrolls
following entry methods:
1 = Amount per Animal
2 = Percent (%) per Load
3 = Amount per Load
3. Press sets entry method.
Ingredient names are listed in a
standard table and can be changed
using the following 9 steps.
1. Repeatedly press until
INGRNM
displays.
2. Press .
3. Press shows ingredient.
4. Press again to edit name.
Display briefly shows
EDIT
and
flashing cursor displayed.
4 4 I
2 1
3
I N G R N M
1
2
3 4