Digi-Star EZ 4600 Manual USB - Manual (Page 22)

Advanced Commands
18 EZ4600 User’s Manual D3843-US REV B
Re-Use Recipe/Pen Data
NOTE: When re-using data stored
in indicator, it takes recipe and
pen information and removes
completed weights loaded or
unloaded and marks them undone.
It will not accumulate data day to
day. Download data to USB Drive
before re-using recipe and pen
data stored.
NOTE: For continuous re-use, set
D.A.N. 466 to on. See page 39.
Mix Timer
The mix timer allows the operator to
set a timer to alert the operator when
the mixing is completed. This can be
manually entered or entered as part
of the recipe using the TMR
TRACKER or other software
package.
1. Indicator .
2. Press and hold .
3. Press while holding
indicator scrolls:
On=Clear Clear=Reuse Net=exit.
Release .
4. Press again to re-use recipe
and pen data.
1. Press .
2. Use the numeric keypad to enter
the amount of time.
3. Press .
4. The Mix Timer will begin to count
down. When it reaches zero, the
alarm light and buzzer will turn on.
5. Press to enter the weighing
mode.
6. Press the or key to re-
enter the batching mode.
C l e a r =
Digi-star
Feed delivery system
1
2
3
4 3
1
3
2
4
5
6
6