Digi-Star SW2600EID - Manual (Page 25)

Operators Manual
D3718 25
Ask Each Time for File Name:
PC prompts operator for filename each time data stored to PC.
Date Specific File Name [yymmdd_xx.csv] (default):
A unique file name automatically generated by program. File name
includes date and sequential number.
Remove Checksum character from stored livestock data line:
Put a check in this box prevents data verification number from
printing on spread sheet.
Auto File Retrieval
Auto Detect StockWeigh and Retrieve Livestock Data (default):
PC senses indicator connected, and automatically stores data in
CSV file. StockWeigh Link software must be running 15 seconds
before indicator connected.
NOTE : Duplicate files created using this command. Be aware that data file
automatically created when indicator connected to PC.
Only Retrieve Livestock Data by Operator Demand:
Operator must enter utilities menu and select the command “Read
StockWeigh” to transfer data from indicator to CSV file in PC.
Clear StockWeigh Memory Mode
Auto Clear After Read:
Memory cleared automatically after read and stored on PC.
Ask to Clear After Read (default)
Program will ask operator “Do you wish to clear the StockWeigh
memory?” after data read and stored on PC.
Only Clear with Function Control
Operator must enter utilities menu and select command “Clear
StockWeigh” to clear memory in indicator.
NOTE : If indicator memory not cleared before reading more ear tags, new
EID data will be added to previously read EID data. Memory
capacity is used up by old data and duplicate data transferred to
the PC.