Weighing errors – Digi-Star SW600 User Manual
Page 13
Operators Manual
WEIGHING ERRORS
OVRCAP
Over Capacity Limit
The display shows the message “OVRCAP” if the weight on scale system
exceeds capacity limit.
+
RANGE
Over Range –
The display shows message "+RANGE" if weight on the scale system is
less than the maximum weight measurable by scale system.
-RANGE
Under Range
The display shows message "-RANGE" if the weight on the scale system is
less than the minimum weight measurable by the scale system.
LO BAT
Low Battery Indication
If the supply voltage drops below the (10.5 Volts), the message
‘RECHARGE BATTERY – TURNING OFF” and “LO BAT” will
periodically show on the display to alert the operator of the low battery
condition.
Warning!
Disconnect the indicator power cord before jump-
starting or fast charging a battery.
Disconnect all indicator leads before welding on
equipment. Damage may occur to the indicator and
load cells.
D3656
13