Digi-Star Cab Control 2000/V - Manual (Page 4)

Cab Control
2
Cab Control Keys
Pressing a button on the Cab Control is like pressing the same button on the indicator.
Any Cab control will communicate with any properly equipped EZ indicator. A cab control
3500 or a Cab Control 3200 may have keys that are not recognized by an indicator with a
different model number.
Turn on the Cab Control
Press [On].
-
A brief and message will be displayed. .
- If no signal is being received, the indicator will flash NODATA and the scale
number. Example:
.
- If a signal is being received, the Cab Control display will match the display on the
scale.
- Pressing a key on the Cab Control front panel causes that key-press to be entered
on the indicator.
NOTE: To turn Cab Control off, press [Off]. Scale indicator cannot be turned on or off
from the Cab Control.
Communicate with a Different Truck
Press [Select] once to check which indicator is communicating.
Press [Select] again until desired indicator number is displayed.
- If a signal is being received, the Cab Control display will match the display on the
scale.
- If desired scale number is not being displayed, see “Setup Cab Control” on page 4.