Digi-Star EZ3400(V) - Manual (Page 10)

Operation
D3714-GB Rev B EZ3400(V) User' s manual 6
Programming recipes
The ingredients in a recipe can be entered in three different ways:
1. Amount per animal (standard setting)
Enter the amount of ingredient per animal per recipe. For example, 9 kg silage and 8 kg corn.
Depending on the number of animals to be fed, the weighing indicator will calculate the total
amount of the ingredients to be prepared: For example, with 100 animals this will be 900 kg silage
and 800 kg corn.
2. Percentage (%) per ingredient
Enter the amount of ingredient per recipe as a percentage (%). For example, 55% silage and 45%
corn. The weighing indicator will calculate the total amount to be prepared per ingredient: For
example, with a total weight of 1000Kg this will be 550 kg silage and 450 kg corn. Attention; the
total must be 100%.
3. Amount per ingredient
Enter the required total amount of ingredient per recipe. For example, 2500 kg silage and 2000 kg
corn.
Changing the programming method
[
E-mthd]
1. Enter 441 and press .
2. Press repeatedly to select the required
programming method for blends.
1 = Amount per animal
2 = Percentage (%) per ingredient
3 = Amount per ingredient
3. Press to confirm the selected
programming method.
Changing ingredient name
The standard ingredient names can be changed as required:
1. Repeatedly press , until iNGRNM is
displayed.
2. Press .
3. Press to select the ingredient to be
changed.
4. Press to change the name. EDIT will
briefly be displayed, followed by a flashing
cursor.
1 2
3
E mthd
ingrnm
1
2
3/4