Eizo DuraVision FDX1501 / FDX1501T 取扱説明書 - Manual (Page 19)

6
*1 DC power terminal block
Connector Pin Assignment Power sequencing
1 2 3
Pin No. Signal
1 DC12V
2 DET *
3 Ground
* Not connected
t1
10V
t1 < 50ms
10V
5V
t2 30ms < t2
DC12V
*2 Button extension connector: S3B-PH-SM4-TB(LF)(SN) (JST)
Connector Pin Assignment
Pin No. Signal
1 KEY0
2 KEY1
3 Ground
●
How to assemble
1. Fasten the screws through the enclosure mounting holes of the monitor (2 each on the left and right sides)
into the enclosure.
Attention
• Please prepare screws that have a diameter of 3 mm and are suitable for use with the enclosure.
(Screws are not included with the monitor.)