3 configuration and trim menu, 3 menu functions & options, 1 home screen – Electro-Chemical Devices (ECD) SMS22 User Manual

Page 19

Advertising
background image

Screen Displayed

Button Pressed

Home Screen

MENU SELECT

Parameter Selection Screen (Ch 2 Status) MENU SELECT

Parameter Selection Screen (Ch 2 Set-Up) MENU SELECT

Parameter Selection Screen (Ch 2 Buffer) MENU SELECT

Contrast (adjustment screen)

MENU SELECT

▼….. To return to the Home screen

3.2.3 Configuration and Trim Menu
The Configure/Trim menu provides access to the menus used to assign parameters, define functions and
trim input and output signals. This group of menus should rarely be needed as the instrument was
configured at the factory before testing and shipment. The basic structure is as follows. See the “System
22 Configuration Manual” for details about these menus, available at

www.ecdi.com

.

Screen Displayed

Button Pressed

Configure/Trim

◄ CALIBRATE ► (enter screen)

Passwords

MENU SELECT ▼(allows menus to be password protected)

Default Display

MENU SELECT ▼(defines Home Screen)

4-20 assign

MENU SELECT ▼(Assigns parameter/function to mA output)

Manual Mode

MENU SELECT ▼(Allows manual control of mA outputs)

Relay assign/Test

MENU SELECT ▼(Assigns triggering parameter to a relay)

PID Assign

MENU SELECT ▼(Assigns PID to a PV)

PWM Assign

MENU SELECT ▼(Assigns Pulse Width Modulation to a PV)

Clock and timers

MENU SELECT ▼(Sets Clock function, assigns Timers)

Logic Gates

MENU SELECT ▼(assigns AND/OR gates)

Ion Species

MENU SELECT ▼(Sets Ion Measured)

General

MENU SELECT ▼( Not Used)

°C/°F & Temp Cal

MENU SELECT ▼( allows temperature trim/cal, choose °C/°F)

4-20 Trim/Test

MENU SELECT ▼(allows mA trim)

Millivolt Trim

CALIBRATE ▼ (return to Home Screen)

3.3 MENU FUNCTIONS & OPTIONS

This section describes the functions of each of the Menu items and how they are configured and used.

3.3.1 Home Screen
The Home Screen displays the Channel 1 PV, Sulfide ppm, % mA output and temperature. Channel 2 PV
displays the pH Value, % mA Output and temperature. When the cursor is on a menu line, not in the
menu setting a parameter, pressing the down (

▼) CALIBRATE key will return the cursor to this screen,

the HOME Screen, from any menu.

SMS-22

Page 10

Advertising