ESI SW8000 - Manual (Page 5)

SW8000 Features
1. S UBWOOFER
Subwoofer unit is 8 inch in diameter with mineral filled polypropylene cone with high
temperature voice coil and damped rubber surround. It is designed to deliver balanced
subwoofer response. Polypropylene is used to react against the input signal accurately and to
deliver even minimal input precisely minimizing distortion.
2. S UB - FREQUENCY P ORT
The hole in the front panel is called Sub-Frequency Port, which discharge extreme low
frequency under 30 Hz. SW8000 is designed to take advantage of the port to generate extreme
low frequency.
3. E NCLOSURE
Enclosure acts as important role as the other components. SW8000 enclosure is designed to
endure impacts from inside under extreme conditions. It employs high-density special MDF and
unique interior reinforcement to provide more stable performance.
4. N ETWORK & P OWER A MPLIFIERS
Network & Power Amplifiers for SW8000 are specially designed for its own subwoofer.
Network distributes subwoofer frequency properly to driver in order to reduce loss of sound and
distortion achieving natural balance of the sound.
In order to generate ultra crispy, powerful sound quality, there is special designed power
amplifier inside SW8000 to drive Subwoofer driver by matching each parameter between
amplifier and driver. The power delivered to subwoofer driver at rated distortion is 100W.
5