Ii. equipment and accessories (fig. 1), Iii. preparing the cleaner for use – ETA Tema User Manual

Page 22

Advertising
background image

II. EQUIPMENT AND ACCESSORIES (fig. 1)

A – vacuum cleaner

A1

– suction vent

A10 – power cord

A2

– lid

A11 – parking holes

A3

– lid lock

A12 – exhaust grid

A4

– START/STOP button

A13 – foam micro-filter

A5

– power cord winding button A14 – filter (adapter) holder

A6

– electric motor regulation

A15 – dust filter

A7

– full filter signaling

A16 – suction micro-filter

A8

– cover (grid)

A17 – accessories compartment lid

A9

– handle

B – accessories

B1 – floor nozzle

B4 – upholstery nozzle

B2 – suction hose

B5 – brush

B3 – suction tube

B6 – crevice nozzle

Note

Accessory options TURBO nozzle, adapter for a hard floor, narrow floor, dust cloth bag

etc. are available for cleaner vacuum.

i

III. PREPARING THE CLEANER FOR USE

Hose

– Connect hose

B2 to the vacuum cleaner by inserting the end piece to suction vent A1 to

the maximum position (Fig. 2). You will hear a clicking sound.

– Disconnect the hose by pressing the button on the end piece and remove the hose by

pulling it slightly.

Telescopic tube

– You can connect tube

B3 with hose handle B2 by slight pushing the handle to the tube

(Fig. 3).

– You can disconnect the tube by pulling the handle slightly out of the tube.

– The telescopic tube allows setting suitable length to fit your figure. Press the lock pin in

the direction of the arrow and pull out or push in the required length of the tube (Fig. 4).

When you release the lock projection, the tube length is fixed. When pulling out, keep the

tube in safe distance from your face as the tube is very long.

Floor nozzle

– Connect and disconnect the accessories (

B1) in the same way as the tube (Fig. 3).

Floor / crevice nozzle / brush

– Connect and disconnect the accessories (

B4, B5, B6) in the same way as the tube (Fig. 3).

You can connect the appliance directly to the hose handle or to the telescopic tube.

Remove all packing material, take out the vacuum cleaner and the accessories. Pull out

necessary length of power cord

A10 and plug the power cord into a socket. Assemble the

vacuum cleaner accessories

B1, B2, B3 (Fig. 2, 3).

22

GB

/ 40

Advertising