ETA Multiplo - Manual (Page 24)

24
GB
Kneading hooks (F))
Use: spread processing, mashing potatoes, spinach, mixing dough etc. speed level 1 – 4,
time of mixing approx. 1 – 5 minutes. We recommend putting loose ingredients in the bowl
first and then add the liquid ingredients when processing tough dough for better mixing.
Inserting: mutual position is designated by their construction, it is therefore impossible to
switch the hooks in the openings. Insert the hooks in respective openings A4 in the bottom
part of the propulsion unit. Release the hooks by pressing the release button A3.
Notice
Turn the appliance on only when the accessory E, F, G is immersed in the ingredients
processed. Let the propulsion unit cool off for approx. 15 minutes after 10 minutes of
continuous operation. The hooks and whisks can be released from the propulsion unit only
when the speed selector A1 is in position 0.
Immersion blender (G)
Use: blending and mixing all kinds of liquids, mayonnaise, dietary and baby food etc.,in
a blending utensil H or another suitable utensil. selector level + TURBO button,
blending time approx. 30 – 60 seconds
Inserting: insert the cover A6, screw the blender G in the opening in the propulsion unit A.
Proceed reversely when removing from the propulsion unit.
Pad/lid (I)
You may use the pad/lid I either as an antiskid pad (if you put it on the bottom of the utensil
H) or you may use it as a closure for utensil H in case of storing ingredients (e.g. in a
fridge), pic. 4.
Stand with rotary bowl (B, D) – for ETA 2088 and 3088
Use: for whisking and mixing without having to hold the propulsion unit in hand.
Inserting: place the stand B on a suitable working surface (see I. SAFETY
PRECAUTIONS). Fasten the desired accessory E into the propulsion unit A or F. Put the
mixer A on the bracket B1 so that the toothing on the accessory fits in the toothing in the
bracket and then push the mixer all the way till it fits closely into the depression in the
bracket (you will hear an audible click). Fold out bracket B1 . In case of processing a thin
mixture, connect a special bowl spatula J. Slide the lid C on the bracket. Place the bowl
D with the ingredients on the stand. Fold the bracket back only after its arrest has been
clicked in.
Removing the propulsion unit (A) – by pressing button B3, the arrest will be released
and it is then possible to remove the propulsion unit A from the fold-out bracket B1.
Light (A5) – for ETA 2088 and 3088
The light is on when the propulsion unit is operating. It serves to give you better control
over the food processing in the rotary bowl.