Exacq exacqVision S-Series User Manual - Manual (Page 3)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 3 of 17
3/24/2014
10. In the site tree, expand the S-Series system and select System.
11. On the System tab, enter and apply any unique name desired for the system.
12. On the Network tab, select bond0.
13. Select Static.
14. Enter an available static IP address for the system, along with an appropriate netmask, gateway, and
primary DNS. (This information can be provided by the network’s IT administrator.)
15. Click Apply.
By default, the S-Series system drives are pre-configured for archiving. You can also use exacqVision Client for S-
Series hardware monitoring, configuration of automatic notifications, event linking, event scheduling, and user
management. For information on using the S-Series drives for archiving, and other available features in
exacqVision Client, see the exacqVision Users Manual.
To re-configure the drives for extended storage, or for information about advanced S-Series features, see the
following sections.
10
11
13
12
14
15