Exacq exacqVision S-Series User Manual - Manual (Page 8)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 8 of 17
3/24/2014
Initialize New or Replaced Drive
Initialization is used to clear a new drive that already has partitions, or to clear a drive that is displaying invalid
information in the client. You should initialize the drive to delete any prior partition information.
WARNING : Initializing an active drive configured by exacqVision client makes all data on the drive inaccessible.
Read the warning before proceeding. If you want to initialize a drive, type the drive number and press Enter. Type
IAMSURE to confirm it. Wait for the process to complete, and then press Enter.