Specifications, Troubleshooting guide – EXCALIBUR 491 SoundMaster Classic USB Turntable User Manual

Page 18

Advertising
background image

SPECIFICATIONS

TURNTABLE PLAYER SECTION

Motor......................................................................DC servo motor

Drive System.................................... .....................Belt Drive

Speeds.....................................................................33-1/3 rpm, 45 rpm and 78 rpm

S/N Ratio................................................................More than 50 dB

Cartridge Type........................................................Ceramic Stereo

Cartridge Stylus......................................................402-M208-165

Output Level...........................................................160-380 mV (5 cm/sec at 1 KHz)

GENERAL

Power Requirements...............................................AC 120 V~ 50 Hz

Power Consumption................................ ...............5 Watts

Dimensions (L x D x H)........................ .................37ʼʼx16.5ʼʼx33ʼʼ (approx)

Weight............................................. .......................4.96 kgs

Standard Accessories..............................................Instruction Manual and 45 rpm Adapter

TROUBLESHOOTING GUIDE

Commonly encountered problems, causes and solutions:

Problem

Cause

Solution

Power does not come on

when the power switch is

pressed.

No sound comes out of

the unit.

Unit is unplugged.

The unit is not connected

to a speaker. The volume

is set too low.

Connect the unit to the AC

power supply.

Ensure the unit is properly

connected to a speaker source.

Adjust the volume.

18

Advertising