EXCALIBUR 491 SoundMaster Classic USB Turntable - Manual (Page 7)

1. Connect the AC power cord to an electrical outlet.
The standard voltage is 120V-50HZ.
2. Plug the other end of the RCA Cable into the auxiliary
input (Aux) on your TV, receiver or other music system
and make sure that the red RCA Cable is inserted into
the red jack and the white RCA Cable is inserted into the
white jack.
3. Press the POWER button located on the front of the
unit.
4. Place a record on the turntable. When playing the
45rpm record, remember to use the adapter included in
the package.
5. Select the player speed according to the record you
want to play and/or record.
6. Remove the tone arm-rest holder.
Gently lift the cue-lever and move
the tone arm to the desired position
over the record. The Turntable will
begin to spin when the arm is moved
toward the record. Lower the cue-
lever slowly onto the desired position
on the record to begin playing music.
7. Press the STOP button to stop playing.
8. Press the PLAY button to continue playing.
9. The tone arm will return to the rest position
automatically at the end of the record. The tone arm
will also return to the rest position when the RETURN
button is pressed.
10. For best performance and product maintenance,
remember to unplug the Turntable when not in use.
If you need to replace the turntable stylus, please refer
on the instructions below:
REMOVING THE OLD STYLUS
1. Place a screwdriver at the tip of the stylus and push
downward as shown in direction “A”.
2. Remove the stylus by pulling the stylus forward and
pushing downward.
INSTALLING THE NEW STYLUS
1. Hold the tip of the stylus and insert it by pressing as
shown in direction “B”.
2. Push the stylus upward as in direction “C” until the
stylus locks into the tip position.
LISTENING TO A RECORD
HOW TO REPLACE THE TURNTABLE STYLUS
7