Flowserve LRGT16-1 Spector compact Conductivity Transmitter System - Manual (Page 27)

The set-point in manual mode or set-point and/or manipulated variable in automatic mode
can be changed by means of arrow keys. The change is effective after 2 s or by pressing
selector key briefly. For manual operation of the continuous blowdown valve first switch to
manual operation using the selector key and then switch to manipulated variable Y. Now it
is possible to use the arrow keys for manual adjustments.
If the measuring current coming from the conductivity transmitter falls below 2 mA or the
line has the wrong polarity the following error message will appear:
With this error message the continuous blowdown valve will be closed.
27