Onboard device configuration – Foxconn R10-A1 User Manual
Page 34
27
3
Onboard Device Configuration
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Onboard Device Configuration
Onboard SATA Controller
[Enabled]
Onboard SATA Mode
[Native IDE]
Onboard LAN Controller
[Enabled]
Onboard LAN PXE OpROM
[Disabled]
Onboard USB Controller
[Enabled]
Azalia HD Audio Controller
[Enabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Onboard SATA Controller
Advanced
► Onboard SATA Controller
This item is used to enable or disable the onboard SATA controller.
► Onboard SATA Mode
This item allows you to set the operation mode of the SATA ports. Setting values are: [Native
IDE], [AHCI].
► Onboard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► Onboard LAN PXE OpROM
This item is used to enable or disable onboard LAN boot option ROM.
► Onboard USB Controller
This item is used to enable or disable the USB controller.
► Azalia HD Audio Controller
This item is enable oe disable the Azalia HD audio.