Foxconn R10-A1 - Manual (Page 40)

33
3
Health
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Power Health Security Save & Exit
PC Health Status
Case Open Warning [Disabled]
CPU Temperature : +88 C
System Temperature : +42 C
CPU Fan Speed : N/A
System Fan Speed : N/A
CPUVcore : +1.312 V
+3.3V : +3.392 V
+12V SYS : +12.096 V
+1.1V : +1.112 V
AVCC : +3.408 V
3VSB : +3.280 V
VBAT : +3.184 V
CPU Warning Temperature [Disabled]
CPU Shutdown Temperature [Disabled]
Smart Fan Control [Disabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Case Open Warning:Set disable
to clear the status
Health
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Temperature
These items show the current CPU temperature detected automatically by the system.
► System Temperature
These items show the current System temperature detected automatically by the system.
► CPU Fan Speed
This item shows the current CPU Fan speed detected automatically by the system.
► System Fan Speed
This item shows the current North Bridge Fan speed detected automatically by the system.
► CPU Vcore/+3.3V/+12V SYS/+1.1V/AVCC/3VSB/VBAT
These items show the Current CPU Ccore/+3.3V/+12V SYS/+1.1V/AVCC/3VSB/VBAt voltage
detected automatically by the system.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► CPU Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► Smart Fan Function
This option is used to enable or disable smart fan function. Default value is [Disabled]. Only
when this option is enabled, the CPU/system fan speed will change automatically with the
CPU/system temperature. "Smart Fan Automatic Mode" is the principle figure of CPU smart
fan function for your reference.