FSR RN-8200 - Manual (Page 32)

3.0 Configuration Utility Software
RN-8200 Reference Manual Page 3-11
3.2.7.4 IR Data Analysis
The “View Raw” button, shown above in Figure 3.2.6.2-1, provides the capability to view the raw IR data as stored
in the Room Navigator. This information can be useful in analyzing IR codes. This raw data is also stored in saved
configuration files. If you need help analyzing your IR codes contact FSR Tech support at
[email protected] .
Send your file along with your questions. An example of the format for a good IR code as displayed when the
“View Raw” button is pressed is shown below.
3.2.8 Button Cmd Setup Tab
This tab is where commands or command sequences (or scripts) can be associated with buttons on the FSR
Advanced Remote Panel. The graphical interface and the command scripting for configuring the button functions
combine to provide a flexible and comprehensive ability to configure the system.