GAI-Tronics 495-001 Mine Dial / Page Phone Interface Cabinet - Manual (Page 16)

Pub. 42004-198D
Model 495-001 Mine Dial/Page Phone Interface Cabinet Page: 16 of 22
f:\standard ioms - current release\42004 instr. manuals\42004-198d.doc
10/11
To page all Mine Dial/Page Phone stations:
1. Depress handset pressbar and listen for dial tone; hold.
2. Dial special page number.
3. Immediately page desired person(s) giving message or call-back instructions (paged person cannot
answer directly).
To call a standard telephone station:
1. Depress handset pressbar and listen for dial tone; hold.
2. Dial desired telephone number.
3. Wait until called person answers, and then talk.
4. Release handset pressbar to terminate call.
Initiating Calls at a Standard Telephone to a Mine Dial/Page Phone
To call one specific station:
1. Dial the telephone number in the normal fashion.
2. Wait until “birdie” signal stops, then page desired person(s). Allow called party 30 seconds to
answer. If there is no answer within 30 seconds, the switchboard connection is automatically
terminated and the called person’s telephone connection returns to a ready condition.
3. Hang-up telephone in normal fashion to terminate call.
To page someone at all stations:
1. Dial the special page number in the normal fashion.
2. Immediately page desired person(s) giving message or call-back instructions (paged person cannot
answer directly).
3. Hang up telephone immediately.
4. Wait for return call.