Wiring power connection – GAI-Tronics 234WM Wall-Mount Stanchion Assembly User Manual
Page 10
Advertising
Pub. 42004-308F
Model 234WM Wall-Mount Stanchion Assembly
Page:
10 of 12
f:\standard ioms - current release\42004 instr. manuals\42004-308f.doc
05/11
Wiring Power Connection
All wiring connections should be complete at this point, with the exception of the stanchion panel light
and strobe wire connections to the incoming power lines. All connections must be made in accordance
with the National Electrical Code (NEC) in the United States or the Canadian Electrical Codes (CEC) in
Canada. Install the power lines per the following diagrams (AC Installation - Figure 8; DC Installation -
Figure 9).
Figure 8. Interconnection Diagram with AC-Powered Strobe
Figure 9. Interconnection Diagram with DC-Powered Strobe
Advertising