Operation, Lcd display at initial power up – GAI-Tronics 10959-201 and 10959-203 Wall-mount Audio Messenger Interface User Manual

Page 16

Advertising
background image

Pub. 42004-403F

M

ODEL

10959-201

AND

-203

W

ALL

-M

OUNT

A

UDIO

M

ESSENGER

I

NTERFACES

P

AGE

14 of 20

f:\standard ioms - current release\42004 instr. manuals\42004-403f.doc
11/13

Operation

Once the CompactFlash

®

is programmed and installed into the unit, the unit operates based on system

inputs and outputs or by manual operation.

LCD Display at Initial Power Up

At initial power up, the AMI unit completes a self-diagnostic of its settings. The LCD display cycles
through the following messages:
 AMI firmware version
 Boot DSP
 Media detected
 EEPROM firmware version
 DSP firmware version
 Progress bar/LOAD CONFIG
 Configuration version
 Configuration date and time
 Configuration file name
 HIO (I/O control module) board firmware version or “HIO not installed.”
 ASM (Zone Interface Module) board firmware version or “ASM not installed.”
 Page/Party

®

board firmware version

 AMI Main board firmware version
 Telephone Interface Mode (if telephone interface installed)
 Telephone Interface Board firmware version or “Telephone Interface not installed.”
 Telephone Interface Greeting file name (if recording a new greeting)
 AMI ready
 Time, page symbol/date

Advertising