GAI-Tronics SSM110 Card Rack Assembly - Manual (Page 3)

Pub. 42004-669L2E
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
SSM110 Card Rack Assembly Installation,
Operation, Maintenance Manual
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
System Overview
The SSM110 Card Rack Assembly is the central control device of a SmartSeries system. The SSM110
Card Rack is designed to control a single-zone SmartSeries system and up to eight access panels. This
system configuration provides health checking (supervision) for the system’s page line and party line 1
cable, handset/speaker amplifiers, and speakers and access panels. Should a fault be detected, the event
may be displayed on the access panel and a printer prints a record of the event.
SmartSeries handset stations and access panels allow personnel to page individuals throughout the
system. Additionally, two-way (telephone type) conversation can occur between stations on a party line.
Single party line systems and five party line systems are available. Refer to Figure 1 for typical system
diagram.
Figure 1. Typical System Diagram