Rapidcall buttons, Call alert – GAI-Tronics ICP9000 Navigator Series Console Operator's Manual User Manual
Page 59
ICP9000 Navigator Series Console Operator’s Manual
Options
59
12/10
The Navigator supports the printing or logging of RapidCall traffic. Upon receipt of any call type and for
clearing of Emergency Alerts, a printer log entry is made. Using CARD Suite, the printing of each type
of call, incoming and outgoing, can be enabled and disabled.
RapidCall signaling may be transmitted on a selected channel or on a CARD Suite-assigned channel.
Note that PTT-ID transmissions may be enabled or disabled on each channel and PTT-ID transmissions
occur on any channel in which PTT-ID transmission is enabled.
RapidCall Buttons
Call Alert
When the
C
ALL
A
LERT
button is pressed, the Signaling window changes to what is shown below.
Figure 25.
The second line of the information window flashes “*CALL ALERT*.” The right side of this line shows
either the ID displayed on the top line of the queue, “UNIT _ _ _ _” or the last ID used. Refer to Figure
26 below.
MOTOROLA PL-A TRANSMIT
*CALL ALERT* UNIT _ _ _ _
1/2 UNIT 0339
0339 CALL ALERT 11:04A
2/2 UNIT 0339
0339 CALL ALERT 11:04A
<0-9/*/#> TO ENTER ID
<SCROLL UP/DOWN> TO SELECT ALIAS
Figure 26. Call Alert Display