Cabinet/locker safety assembly instructions, Danger warning, Tools and parts – Gladiator GATB302DRG Premier Series Tall GearBox User Manual

Page 2: Cabinet/locker use requirements, Unpack the cabinet/locker

Advertising
background image

2

CABINET/LOCKER SAFETY

ASSEMBLY INSTRUCTIONS

Tools and Parts

Gather the required tools and parts before starting installation.
Tools Needed:

Parts Supplied for Locker Model:

Parts Supplied for Cabinet Model:

Cabinet/Locker Use Requirements

Intended for use in a garage.

Maximum weight limit is 50 lbs (22 kg) for each shelf, not to
exceed 300 lbs (136 kg) for the cabinet/locker.

Maximum weight limit is 300 lbs (136 kg) for the cabinet/locker.

Unpack the Cabinet/Locker

1.

Remove the key located in the handle, and unlock the door.

2.

Remove and verify the contents. See “Parts Supplied” for your
model.

3.

Dispose of/recycle all packaging materials.
NOTE: Keep the two rear cardboard corners. They are needed to
cushion the cabinet/locker during caster installation.

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

⁷⁄₁₆" Socket wrench

³⁄₈" Wrench

Phillips screwdriver

Flat-blade screwdriver

Rigid casters (2)

Swivel casters (2)

¹⁄₄" – 20 Self-locking nuts (16)

¹⁄₄" – 20 x ¹⁄₂" Carriage-head

bolts (16)

Half-width shelves (4)

Double hooks (2)

#10 – 24 x

¹⁄₂"

Pan-head screws (4)

#10 – 24 Nuts (4)

Key (1)

Rigid casters (2)

Swivel casters (2)

¹⁄₄" – 20 Self-locking nuts (16)

¹⁄₄" – 20 x ¹⁄₂" Carriage-head

bolts (16)

Full-width shelves (3)

Key (1)

Advertising