Gladiator GABK362PSS Ready-To-Assemble Cabinet Bracket Kit - Manual (Page 2)

2
MOUNTING BRACKET SAFETY
INSTALLATION INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
Parts Supplied:
Bracket Use Requirements
■ Intended for use with Gladiator ® Steel Large GearBox or Extra
Large GearBox cabinets only. Please use the instructions
specific to your cabinet.
■ Intended to be used for mounting cabinets on Gladiator ®
GearWall ® panels or GearTrack ® channels.
■ Brackets will support a cabinet with a maximum weight limit of
250 lbs (113.6 kg).
Unpack Brackets
1. Verify contents. See “Parts Supplied.”
2. Dispose of/recycle all packaging materials.
Assemble Brackets
Slide the end of one bracket section into the end of another section
until the center holes are aligned.
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
■ ¹⁄₂" Wrench
■ Mounting bracket sections (6)
■
⁵⁄₁₆" Flange nut (9)
■ Carriage-head bolt (9)
■ Washer (9)