Guntermann & Drunck USB Ranger 2211 - Manual (Page 11)

10
PROBLEM CAUSE SOLUTION
Link LED on the
local and remote
extenders is off. • The remote extender is not
receiving power.
• The local extender is not
receiving power.
• The link cable is
malfunctioning.
• The USB Ranger® 2211 is
malfunctioning.
1. Confirm Host PC is on and providing power to
local extender.
2. Ensure the supplied AC power adapter is properly
connected to the local extender or the remote
extender.
3. Ensure the Cat 5 cabling between the local and
remote extenders is properly installed or replace
the link cable.
4. Check that the AC adapter is connected to a live
source of electrical power.
5. Contact Technical Support for assistance.
NOTES