Guntermann & Drunck USB Ranger 2211 - Manual (Page 7)

Installation Guide
Mounting the Local Extender or Remote Extender
If mounting is required, the local and remote extenders have two mounting slots on each side for use with
tie/zip wraps (not included).
Preparing for Installation
Before you can install the USB Ranger® 2211, you need to prepare your site:
1. Determine where the computer is to be located and set up the computer.
2. Determine where you want to locate the USB device(s).
3. If you are using surface cabling, the USB Ranger® 2211 supports a maximum distance of 100m.
OR
If you are using premise cabling, ensure Cat 5 cabling is installed between the two locations, with
Cat 5 information outlets located near both the computer and the USB device(s), and the total length,
including patch cords is no more than 100m.
6
Connect power adapter to either the local or remote extender.
USB 2.0 over 100m
Cat 5 cabling (or better)
mounting slot