Troubleshooting – Guntermann & Drunck USB 3.0 Spectra 3022 User Manual
Page 14
USB Extender Mounting Options
The bottom of the Spectra 3022 enclosures feature four convenient pre-drilled holes for optional mounting.
Based on your requirements, choose from two available mounting options:
1. USB Extender Mounting Kit (Purchased separately Order Part # 10-00406 USB Mounting Kit - Silver
To locate a distributor/reseller in your area, visit:
2. USB Extender Direct Surface Mounting (Using your own hardware, stencil provided on page 14)
OPTION 1: USB Extender Mounting Kit - each kit includes:
• 2 mounting brackets
• 4 (M3.0) locking washers
• 4 (M3.0 x 5mm) Phillips pan head screws
• Mounting bracket installation guide (see diagram below)
1 kit required to mount per LEX or REX, 2 kits required per Spectra 3022 extender system.
Using a Phillips screwdriver, in the order as illustrated below, fasten and secure the provided screws, locking
washers and brackets into place.
Once the bracket mounting is secured onto the extender, it is ready for mounting onto a surface. Please note
you will need to provide your own screws to secure the extender using the available slots on each bracket.
13
note