Guntermann & Drunck USB 3.0 Spectra 3022 - Manual (Page 8)

Installing the Spectra 3022 System
Preparing Your Site
Before you can install the Spectra 3022, you need to prepare your site:
1. Determine where the computer is to be located and set up the computer.
2. Determine where you want to locate the USB device(s).
3. Ensure f iber optic cabling is in place, prepared, properly terminated, and within the maximum
distances as def ined for the cabling standard used.
Preparing Your Computer
The Spectra 3022 does not support suspend modes of operation. As such, your computer should be
configured to not go into “suspend mode” or to “suspend” the USB ports.
To perform the changes:
Windows (7/8/8.1)
To disable “suspend” settings on your computer:
1. Open Control Panel. Open Power Options.
7