Installation, Connection to the matrix switch, Power supply – Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants User Manual
Page 100
User module »DVI-CON-12V«
96 · Target and user modules
Installation
Connecting the console devices
Keyb.:
Connect the PS/2 keyboard of the local console.
Mouse:
Connect the PS/2 mouse of the local console.
Keyb./Mouse:
Connect the USB keyboard and/or USB mouse of the local console.
DVI/VGA Out:
Connect the monitor of the local console.
Micro In:
Connect the optional microphone of the local console.
Speaker:
Connect the optional speakers of the local console.
Connection to the matrix switch
Transmission:
Use a category 5e (or better) twisted pair cable to connect the Transmis-
sion interface to a Dynamic Port (RJ45) of the matrix switch.
Power supply
Main Power:
Connect the power cable to the power pack and a power outlet.
Red. Power:
If required, connect the power cable of the optional power pack to this
interface. This provides a redundant power supply. Connect the power cable with
the power pack and a power outlet of a different power circuit.
LED Out:
If you expanded the functional range of the matrix switch by purchasing the
TradeSwitch feature, connect the optional TS-LED-2 (order number A6100041) to this
interface.
NOTE:
Both keyboard and mouse signals can be transmitted to the computer using
the PS/2 or the USB interfaces.
NOTE:
You can also combine PS/2 and USB devices, for example by connecting a
USB mouse and a PS/2 keyboard.
NOTE:
You can also connect the target module directly to a compatible user module.
Transmission
Mouse
Keyb.
DVI/VGA Out
Micro In Speaker Keyb./Mouse
Red. Power
LED Out
Main Power