Administrating edid profiles – Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants User Manual
Page 115
Configuration
Target and user modules · 111
3. Select
Selectkeys
and press
F8
to select one of the following options:
4. Press
F2
to save your settings.
Administrating EDID profiles
The EDID information (Extended Display Identification Data) of a monitor gives the
graphics card of a connected computer information about various technical features
of the device.
The EDID profile of the monitor that is connected to the user module, is not avail-
able at the target module. Therefore, the target module transmits a standard profile
to the computer. The EDID information of the profile are optimised for the majority
of available graphics cards.
How to transmit the EDID profile of the connected monitor to the target module:
1. Press the
Alt+Num
(default) hotkey to open the on-screen display.
2. Select
EDID
and press
Enter
.
3. Select
Send monitor‘s EDID
and press
Enter
.
4. Press
Esc
to close the EDID menu.
How to activate the G&D EDID profile:
1. Press the
Alt+Num
(default) hotkey to open the on-screen display.
2. Select
EDID
and press
Enter
.
3. Select
Install default EDID
and press
Enter
.
4. Press
Esc
to close the EDID menu.
1,
2:
Activates select keys
1
and
2
F1
,
F2:
Activates select keys
F1
and
F2
NUM 1, NUM 2
Activates select keys
NUM 1
and
NUM 2
A
,
B:
Activates select keys
A
and
B
ADVICE:
In some cases it is recommended to send the EDID profile of the console
monitor to the target module. Now the connected computer receives the EDID data
of the console monitor.
NOTE:
By activating this profile, you might delete a transmitted EDID profile.