Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 94)

User module »DP-CON-2«
90 · Target and user modules
Back panel
The Transmission interface at the back panel of the user module provides additional
status LEDs. The LEDs have the following functions:
TradeSwitch-LED
The optional TS-LED (order number A6100041) lights if the key-
board and mouse signals of a master console are accessing the user
module.
LED Colour Status Meaning
left Yellow off No connection to network.
blinking Network connection to an end device.
right Green on A user module is accessing the target module.
blinking No communication with matrix switch.
flashing Connection to matrix switch established.
No user module is accessing.
flickering Keyboard and mouse inputs are forwarded by the accessing
user module.
The flickering is defined by the user’s entries.
Yellow flashing A firmware update is carried out.
NOTE: Keyboard and mouse signals can only access another user module or a tar-
get computer if you purchased the TradeSwitch feature for the matrix switch.
Micro In Keyb./Mouse Speaker
Generic
Main Power
Red. Power DisplayPort Out
LED out Mouse
Keyb. Transmission 1
Transmission 2