Hansol 520F - Manual (Page 8)

15
Specifications
This monitor equipped with DPMS(Display Power Management Signaling)
function which automatically leads the monitor to the state of power saving
that consumes just a little power less than 5Watt, when the computer is left
unattended.
Although the monitor can be left in power-saving mode for longer periods, we
recommend that you turn it off after your daily work
The DPMS function requires support from the computer system of any
software DPMS function applied, currently being used. If the keyboard(or
mouse) is left unattended for a certain period, the program or system will set
the sync signals to DPMS modes. The DPMS function has three status.
The recommended signals, power consumption and recovery times are shown
in the table below.
14
Power management
Operation
LCD
Input
Type TFT Color
Size
Dot Pitch
Brightness
Response Time
Viewing Angle 15.0Ó viewable, diagonal
0.297 X 0.297(mm)
250 cd/m
2 (Typ)
40msec Max.
U/ D : 55
°/60°, R/L: 70°/70°
Signal
Type RGB Analog
15pin D - sub
Sync
H - Freq
V - Freq 31.5KHz ~ 60KHz
56Hz - 75Hz
Video Band Width 80MHz Max
Display Active Area 304.1(H) X 228.1(V)
Color 262.144(Normal), 16.777.216(Expansion)
Resolution(max)
User Controls & OSD Controls
Power Management
Power Consumption
Plug & Play
1024 X 768@75Hz
Contrast, Brightness, H/V Position etc.
VESA DPMS
30Watt(Max)
Power DC 12V 2.5A
VESA DDC1/2B
Approval TCO99, FCC, CE, UL, MPRII
Tilt U/D 35 °/ 5°
Temperature
Operating 0 to 40 °C
Storage - 10 to 50 °C
Humidity
Operating 30% to 80%(Non - condensing)
Storage 5% to 90%(Non - condensing)
Weight
Unit 4.35Kg
Carton 6.25Kg
Dimension(W X H X Dmm) 393 X 190 X 393 mm
Hsync
Pulse
No
Pulse
Pulse
No
Pulse
Vsync
Pulse
Pulse
No
Pulse
No
Pulse
Video
Active
Blank
Blank
Blank
Status
On
Standby
Suspend
Off
Signal Power
Consumption
30Watt (Max)
Less than
5 Watt
Within
2sec
Recovery
Time
LED
Indicator
Green
Alternating
Green/Orange (0.5sec)
Alternating
Green/Orange (1sec)
Orange
English
*1¿ 97.3.29 10:26 AM ˘ ` 14