Harken 46.2ST Winche - Manual (Page 6)

6 Radial Winch 46.2 ST Installation and Maintenance Manual
Procedure2
To install, you must remove the winch skirt and use hexagonal headed bolts.
Tools needed One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
2. Take off the skirt n°2 1. Remove the skirt n°2 with the help of the
screwdriver placed as shown by the
symbol
5. Lift off the drum n°23
Install the winch on the deck in the position you have chosen, keeping in mind
the limits described on page 4 and using socket head (SH) bolts.