Harken 60.3ST Winche - Manual (Page 6)

6 Radial Winch 60.3 ST Installation and Maintenance Manual
10. Remove the drum support n°16
6. Remove the stripper arm housing n°21
Install the winch on the deck in the
position you have chosen, keeping
in mind the limits described on page
4 and using hexagonal headed M8
bolts.
8. Slide out the central shaft n°19 9. Unscrew the 6 hex screws n°17
( 20Nm/177 in-lb)
Follow steps below only to install the winch using hexagonal headed bolts
7. Slide out the assy clutch n°37