3 st – Harken 60.3ST Winche User Manual
Page 9
Advertising
9
Radial Winch
60.3 ST
Installation and Maintenance Manual
9. Unscrew the 6 hex screws n°17
( 20Nm/177 in-lb)
10. Slide out the drum support n°16
11. Remove the gear n°31, pawls carrier n°33,
the bearings n°34 and 36 and the pin n°35
Important: washer n°7 may remain inside the
drum support!
8. Slide out the central shaft n°19
7. Slide out the assy clutch n°37
12. Remove the gear n°6, pawls carrier n°3
and the washer n°7
Advertising
This manual is related to the following products: