Cisco IP Phone 7942G User Manual

Page 61

Advertising
background image

Using Call Logs and Directories

Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager 6.1(3) (SCCP and SIP)

Dial from a call log
(while not on another
call)

1.

Choose

> Missed Calls, Placed Calls, or Received Calls.

2.

Highlight a call record.

Note

If the Details softkey appears, the call is the primary entry of a
multiparty call. See the

Tip

section below.

3.

If you need to edit the displayed number, press EditDial followed by
<< or >>. To delete the number, press EditDial followed by Delete.
(You may need to press the more softkey to display Delete.)

4.

Go off-hook to place the call.

Dial from a call log
(while connected to
another call)

1.

Choose

> Missed Calls, Placed Calls, or Received Calls.

2.

Highlight a call record.

Note

If the Details softkey appears, the call is the primary entry of a
multiparty call. See the

Tip

section below.

3.

If you need to edit the displayed number, press EditDial followed by
<< or >>. To delete the number, press EditDial followed by Delete.
(You may need to press the more softkey to display Delete.)

4.

Press Dial.

5.

Choose a menu item to handle the original call:

Hold—Puts the first call on hold and dials the second.

Transfer—Transfers the first party to the second and drops you from
the call. (Press Transfer again after dialing to complete the action.)

Conference—Creates a conference call with all parties, including
you. (Press Confrn or Conference again after dialing to complete the
action.)

EndCall—Disconnects the first call and dials the second.

See if the line in the call
log is busy before placing
a call to that line

Look for Busy Lamp Field indicators. See

Using BLF to Determine a Line

State, page 41

.

Place a call from a URL
entry in a call log (SIP
phones only)

1.

Choose

> Missed Calls, Placed Calls, or Received Calls.

2.

Highlight the URL entry that you want to dial.

3.

If you need to edit the entry, press EditDial.

4.

The

icon appears to indicate that you can begin editing

characters in the URL entry.

5.

Press Dial.

If you want to...

Then...

Advertising
This manual is related to the following products: