HiTi P110 - Manual (Page 15)

HiTi P110S user manual
13
3. ID Photo
Choose ID PHOTO, and press
( ) to continue.
Quick Print I D p h o t o
Ʀ It is allowed to change images loaded before by pressing [SWAP] when the selector aims at the image.
Ʀ
If your printer is in Event Photo mode, please refer to the [SETUP] part to switch to ID Photo mode.
Ʀ P110S ID formats are saved in the internal memory of the printer. User may freely delete the undesired ID
formats from the printer and add new formats from the ID Creator application software bundled.
Ʀ
Selection in ID Photo will be memorized and applied to overall setting. You only have to make the selection
once unless you want to change to other region.
Note
1 2
Select an ID format, and then
press ( ) to continue.
ESC OK
A
A A
A A
A A
A
A
B A
B A
B A
B
A
A A
A A
A
A
B
A
B
A
B
A A
0 0 1
A
0 0 2
0 0 3
B
0 0 4
3
Load images into column
highlighted.
ESC OK
4
Select an image, and then press
( ) to continue.
003
ESC OK
004
EDIT
001 002 5
Repeat step 3 and step 4 to
finish loading images into the
second column.
ESC OK
6
* When all columns are filled,
please determine the number
of copies and press
( ) to start printing.
ESC OK
X 0 3
7
Select a desired region and
press ( ) to continue.
Region selection currently is only
available on the printer purchased
in North America and South America.
Only ID formats for North America
and South America are available now.
More ID formats will be provided in
the future.
R e g i o n
A s i a p a c i f i c
C h i n a
E u r o p e
I n d i a
M i d d l e E a s t / A f r i c a
N o r t h A m e r i c a
S o u t h A m e r i c a
ESC OK