DeLorme 6 - Manual (Page 382)

XMap User Guide
374
OR
To send all routes, just click Routes.
5. Click Send.
The route is sent to the device and a progress bar indicates the copy status.
6. Click Done.
To Receive Routes
Use the following steps to receive routes from your Earthmate GPS PN-20.
1. Connect your device to your computer with the USB cable and power it on.
2. Click the Exchange button on the toolbar.
3. Select Earthmate GPS PN-20 from the drop-down list in the upper-right
corner of the dialog box.
4. In the right pane of the dialog box, click the plus sign next to Routes, and
then click the route you want to receive into XMap.
OR
To receive all routes, just click Routes.
5. Click Receive.
The route is sent to XMap and a progress bar indicates the copy status.
6. Click Done.
Tip You can also open the Exchange dialog by clicking the Exchange button
on the GPS tab or the Handheld Export tab.
Sending/Receiving Tracks to/from Earthmate PN-20
You can use XMap® to exchange waypoints, tracks, routes, and maps with the
DeLorme Earthmate® GPS PN-20.
Notes
• To rename, delete, or send/receive a track, right-click the item in the
Exchange dialog and select the appropriate option. You can also delete a track
by clicking the item and then clicking the Delete button.
• See also, the Exchanging PN-Series Data and Converting Tracks into Trails
tutorials.
To Send Tracks
Use the following steps to send tracks to your Earthmate PN-Series GPS.
1. Connect your device to your computer with the USB cable and power it on.
2. Click the Exchange button on the toolbar.
3. Select Earthmate GPS PN-20 from the drop-down list in the upper-right
corner of the dialog box.
4. In the left pane of the dialog box, click the plus sign next to Track Layers,
and then click the track layer or contents you want to send to the Earthmate
GPS PN-20.
OR
To send all tracks, just click Track Layers.