DeLorme 6 - Manual (Page 384)

XMap User Guide
376
To Send Waypoints
Use the following steps to send waypoints to your Earthmate GPS PN-20.
1. Connect your device to your computer with the USB cable and power it on.
2. Click the Exchange button on the toolbar.
The Earthmate PN-Series Exchange dialog box opens.
3. In the left pane of the dialog box, click the plus sign next to Waypoint
Layers, and then click the waypoint layer or contents you want to send to the
Earthmate GPS PN-20.
OR
To send all waypoints, just click Waypoints.
4. Click Send.
A progress bar indicates the copy status.
5. Click Done.
To Receive Waypoints
Use the following steps to receive waypoints from your Earthmate GPS PN-20.
1. Connect your device to your computer with the USB cable and power it on.
2. Click the Exchange button on the toolbar.
The Earthmate PN-Series Exchange dialog box opens.
3. In the right pane of the dialog box:
If you want to receive one waypoint at a time into XMap, click the plus sign
next to Waypoints, and then click the waypoint you want to receive.
OR
If you want to receive all waypoints, just click Waypoints.
4. In the left pane of the dialog box, click the plus sign next to Waypoint
Layers, and then click the layer where you want to send the waypoint. If you
want to copy the waypoint to a new waypoint layer, click New and then click
Waypoint Layer.
Note If you do not select a layer and an existing waypoint layer is
highlighted in the left pane of the dialog box, the waypoint is received in that
layer. If a non-waypoint option is highlighted (for example, a track layer), a
new waypoint layer is automatically created.
5. Click Receive.
A progress bar indicates the copy status.
6. Click Done.
Tip You can also open the Exchange dialog by clicking the Exchange button
on the GPS tab or the Handheld Export tab.
States Included in Regional Map Packages
Regional map packages are DeLorme-created, multi-state data regions that provide
much greater detail (.25-mile scale and up, more roads, better routing connectivity,
etc.) than the base map on the device. Not all devices require regional map
packages. Regional map packages contain only XMap USA Topographic Data.