Horton Legend Ultra Lite - Manual (Page 4)

6. Install the quick disconnect (female) attachment with lever on the quiver mounting bracket using the two Phillips pan-head
machine screws and the
7 ⁄
16
'' Nylock nuts. Align the open end with the lever facing the front of the crossbow (photo 6).
7. Insert the quiver with male attachment into the quick disconnect (female) attachment with lever, and lock into place
(photo 7).
ADJUST CHEEK PIECE & BUTT PLATE
The Legend Ultra Lite is equipped with a rubber cheek piece that adjusts to any of seven fixed
positions to create perfect eye-level alignment, and a butt plate that adjusts to one of three
fixed positions to match up perfectly with the shooter’s length-of-pull.
Cheek Piece Adjustment:
1. To adjust the cheek piece, remove both
3 ⁄
16
'' x ½'' shoulder screws using a 3 ⁄
32
'' Allen wrench.
2. Slide the cheek piece over the desired alignment holes to create your perfect eye-level
alignment (photo 1).
3. Replace the screws once you have the proper adjustment for your shooting needs.
Butt Plate Adjustment:
1. To adjust the rubber butt plate, remove both
3 ⁄
16
'' x ½'' shoulder screws using a 3 ⁄
32
'' Allen wrench.
2. Slide the butt plate into one of three fixed positions for your perfect length-of-pull (photo 2).
3. Replace the screws once you have the proper length.
INTEGRATED SAFETy WINGS & FORE-GRIP
Keep your fingers and thumb on your fore-grip
hand below the string and arrow flight deck when you fire your
crossbow. Otherwise, the bow string will severely injure or
amputate them when you pull the trigger.
The Legend Ultra Lite comes standard with rubber safety wings
which are designed to help keep the shooter’s fore-grip fingers
and thumb safely below the flight deck while shooting. The wings
are bedded between the fore-grip and barrel. If for any reason
they are lost or damaged, contact Horton for replacement
immediately at www.hortoncrossbows.com or 330-628-9245.
STRING & CABLE SPECIFICATIONS
DANGER
1
2
7
Insert the 3-Arrow Instant Detach Quiver into the
female bracket and lock into place with the lever.
Part Number Length Materials Twists
String: HCA-11915 String: 34.0625'' String: DynaFLIGHT 97, 28-strands String: Pre-twisted
Cables: HCA-13015 Cables: 23.0625'', 5'' hard yokes Cables: DynaFLIGHT 97, 28-strands Cables: Pre-twisted
3
Safety wings are bedded between
the stock and barrel. They help
prevent thumb and finger injury
and they dampen noise.
Proper hand position.
6
Install the quick disconnect (female) attachment.
Slide cheek piece over
desired alignment holes.
Slide butt plate into one of
three positions.