Adjusting the seat – HP Velotechnik Spirit User Manual
Page 14
HP
Velotechnik
12
Adjusting the seat cushion horizon-
tally
The seat cushion is attachted to its brackets in
long holes.That way you can adjust the hori-
zontal seat position individually.
The more you move the cushion to the front,
the larger the seating area which distributes
your weight evenly.
However, if the cushion is too far towards the
front you may feel a gap between seat and
back rest.
Also, the further the cushion is at the front
the bigger is the feeling of being pinched at the
front part of the cushion, also see page 11 for
reference.
We recommend to start with a middle posi-
tion and to change it only when necessary.
At the bottom of the seat there are four hex-
headed screws. Unscrew these screws with a
hex key 4 by several turns.
Tighten the screws with 4-6 Nm.
Adjusting the seat
You can move the seat cushion back or forth after you have loo-
sened the four hex-headed screws.