HP Velotechnik Spirit - Manual (Page 62)

HP
Velotechnik
60
Warranty pass
This service plan is intended to give you a
rough overview over the required mainte-
nance and service works. In no case it can re-
place the detailed instructions in this manual!
You can perform service works marked with a
“
●
” when you have the required skills and
tools as for example a torque wrench.
When you discover any defects while checking
your bicycle they have to be repaired immedi-
ately. If you are in doubt please consult your
local bike shop.
Works marked with a " ▲" should only be car-
ried out by a trained bicycle mechanic.
At the annual service the bicycle mechanic has
to carry out all works listed as well as all serv-
ices and maintenance works necessary accord-
ing to the momentary technical standard and
professional knowledge.
Please follow at any rate the manuals of the
parts manufacturers.
Service plan (continued)
parts work
hubs check bearing play and brake discs mount
pedal check bearing play, check binding mechanism
frame check clamping of the front boom
clean and conserve
check for damage, damage to paintwork
quick release check correct closing
derailleur check for movement and function
clean and lubricate
screws and nuts check and tighten
mudguards check for damage and correct position
valves check for correct position and air tightness
stem check clamping
check clamping screws
cables dismount, lubricate, replace if necessary